THB7128 stepper motor driver board 3A
Product Introduction |
* Queen bridge MOSFET driver, low on-resistance Ron = 0.53Ω * Maximum voltage 40VDC, large current 3.3 A (peak) * A variety of optional segments (1,1 / 2,1 / 4,1 / 8,1 / 16,1 / 32,1 / 64, 1/128) * Auto half current lock * Built Hybrid decay mode * Built-in input pull-down resistor * Built-in temperature protection and overcurrent protection |
Spec | |
Logic input voltage | 2-6V |
voltage | 9-12V |
Output current | 0-3A |
Adjustable voltage Vref | 0-3V |
Operating temperature | -30 ℃ -105 ℃ |
Storage temperature | -40 ℃ -125 ℃ |
Module 6 DIP switch, set the current top three, after setting three segments, interpreted as follows: |
Output current | 0.7A | 1.3A | 1.75A | 2.1A | 2.4A | 2.6A | 2.8A | 3.0A |
SW1 | OFF | ON | OFF | ON | OFF | ON | OFF | ON |
SW2 | OFF | OFF | ON | ON | OFF | OFF | ON | ON |
SW3 | OFF | OFF | OFF | OFF | ON | ON | ON | ON |
Subdivision | 1 | 2 | 4 | 8 | 16 | 32 | 64 | 128 |
Steps / rev | 200 | 400 | 800 | 1600 | 3200 | 6400 | 12800 | 25600 |
SW4 | ON | OFF | ON | OFF | ON | OFF | ON | OFF |
SW5 | ON | ON | OFF | OFF | ON | ON | OFF | OFF |
SW6 | ON | ON | ON | ON | OFF | OFF | OFF | OFF |
Write new review
All Categories
- sale
- Arduino
- GPS
- GSM/GPRS
- LCDs
- Single Board Computerv
- Tools
- Development Boards
- Breakout Boards
- Power and Batteries
- Unmanned Aerial System
- Programmers
- Printer
- Tablet
- Intelligent Building
- Electric Vehicle
- Drivers
- Wireless and Communications
- Robotics
- Tracking
- solar Cell
-
Sensors
- IMU/AHRS
- PIR
- Ultrasonics
- Biometrics
- Touch
- liquid level sensor
- Radiations
- Current/Voltage
- Proximity Sensor
- Temperature
- Humidity
- Inclinometer
- Gyro
- Accelerometers
- Flame
- Sound
- Pressure
- Flow Meter
- GAS
- Laser
- Infrared
- Mocrowave
- Magnet & Compass
- Light / image / Color
- Vibration/Force/Torque/Flex
- anemometer
- ID
- Sound
- Components
- Cables
- Interface Converter
- LED and Lighting
Related Articles
There is no article related to this product.