Raspberry Pi 802.15.4 Radio
This module adds support for 6LoWPAN over 802.15.4 to the Raspberry Pi. With this, you can very cheaply turn a Raspberry Pi into a 6LoWPAN border router for your Internet of Things.
The module plugs directly onto pins 15-26 of the RPi's P1 header, leaving the remaining pins free for other uses.
Its intended use is to turn an RPi into a border router for a 6LoWPAN network, but it has other uses as well. You can skip the 802.15.4 and just use it as a basic 2.4GHz radio, and you can even hook it up to an Arduino if you want, or anything else with an SPI port and 4 GPIOs.
Linux recently has usable 6LoWPAN and 802.15.4 implementations, as well as a driver for this module, but this is bleeding-edge stuff so you'll want to use the wpan-next kernel as of this writing.
- sale
- Arduino
- GPS
- GSM/GPRS
- LCDs
- Single Board Computerv
- Tools
- Development Boards
- Breakout Boards
- Power and Batteries
- Unmanned Aerial System
- Programmers
- Printer
- Tablet
- Intelligent Building
- Electric Vehicle
- Drivers
- Wireless and Communications
- Robotics
- Tracking
- solar Cell
-
Sensors
- IMU/AHRS
- PIR
- Ultrasonics
- Biometrics
- Touch
- liquid level sensor
- Radiations
- Current/Voltage
- Proximity Sensor
- Temperature
- Humidity
- Inclinometer
- Gyro
- Accelerometers
- Flame
- Sound
- Pressure
- Flow Meter
- GAS
- Laser
- Infrared
- Mocrowave
- Magnet & Compass
- Light / image / Color
- Vibration/Force/Torque/Flex
- anemometer
- ID
- Sound
- Components
- Cables
- Interface Converter
- LED and Lighting