ماژول درایور استپر موتور 4فاز با UL2003 SMD

ماژول درایور استپر موتور 4فاز با UL2003 SMD

مدل: (ROB-00065)
وضعیت: ناموجود

Overview

ULN2003 Stepper Motor Driver Board is use the ULN2003 DARLINGTON ARRAYS to drive the 4-phase 5-wire stepper motor (5v-12v). It's easy to use Arduino or other development platform to drive the stepper motor by this driver board.

Features

  • The Mini Stepper Driver is small size and easy to use
  • It used ULN2003 to amplify the control signal from the Arduino
  • The Drive voltage can be up to 15V
  • Only 4 channels used for driving steppers, four status LEDs respectively, you can only see it flashing when you slow down the signal
  • Separate Power channel for power supply
  • JST XH2.54 stepper 5-wire interface for standard stepper, one COM VCC, and four signal GND

How to Control Stepper :

  • Step motor is to a machine to convert pulse to angle displacement
  • So if you give stepper driver a certain pulse signal, it will drive step motor to a certain angle
  • You can control the angle the stepper moved by the number of the pulse
  • And you also can control the speed of the stepper rotate by the frequency of the pulse. The following picture is the schematic of the stepper driver

Specifications

  • The logic control voltage : 3~5.5V
  • Motor Supply Voltage : 5~ 15V
  • It can sinks 500mA from a 50V Supply, but Limit the Driver Voltage under 15V
  • Operating Temperature : -25~+90°

Downloads

PDF File
108.91 KB
دسته بندی محصولات
مقالات مرتبط با محصول
مقاله مرتبط با این محصول وجود ندارد.
مرورگر شما بسیار قدیمی است!
جهت مشاهده این وب سایت به صورت صحیح، بروزرسانی مرورگرتان ضروری خواهد بود. بروزرسانی مرورگر
×