ODROID-VU7 : 7inch HDMI display with Multi-touch
ODROID-VU7 : 7inch HDMI display with Multi-touch
7-inch multi-touch screen for ODROIDs gives users the ability to create all-in-one, integrated projects such as tablets, game consoles, infotainment systems and embedded systems. The 800x480 display connects to ODROID-C2 / C1+ via an HDMI link board and a micro-USB link board which handles power and signal. Just connect a DC plug in to the DC-jack on C2 / C1+, and you are ready to play, once you install the latest OS up- date. This high-quality touchscreen is specifically designed to work with both Android and Linux on the ODROID-C1+, ODROID-C2 and ODROID-XU4. | ||||||
| ||||||
| ||||||
Assembly Guide You can easily attach the C2 / C1+ board onto the backside of the LCD screen in order to create a fully integrated system. It also works with the original C1 board if you use a micro-HDMI cable and a micro-USB cable. Option 1 : Mount the C1+ board on the LCD unit with 3pcs of 8mm PCB supporters. The HDMI link board and micro-USB link board are used for interface and power supply. | ||||||
Option 2 : A Micro-to-micro USB cable and flexible flat HDMI cable can be used as well. The 35cm cable kit is included. with ODROID-XU4
| ||||||
| ||||||
| ||||||
The Chromium browser supports the multi-touch pinch- zoom gesture, so you can enjoy the zoom in and out like a smartphone. The touchscreen also works with Android OS for the C1+. However, you need to use release version 2.0 or higher in order to use the touchscreen features. | ||||||
Touch the sound!! | ||||||
Known issues. 1. The display shows noise on the screen in the boot process and power-down process because there is no off-sync filter circuit. 2. On the C1+, there will be after-image or noise when the system turns off if you use the OTG port. To fix this issue, you must remove(de-solder) the R94 from the C1+ PCB. If you have the C1+ PCB Rev 0.4 2015/09/30, just remove a JUMPER on J8. 3. There is no backlight control except for the slide switch. So software can't adjust the brightness neither turn on-off the backlight. For Android users! C1 Android V2.0 or higher version supports the VU7. XU4 Android V3.2 has been released for the VU7 recently. Check our WiKi pages. Set proper resolution settings in to boot.ini file and tweak the build.prop to display the navigation bar. http://odroid.com/dokuwiki/doku.php?id=en:xu3_android_release_note_v3.2#notes_for_the_odroid-vu7 Also don't forget to change the vout mode to "DVI". "HDMI" mode make a lot of noise on the screen. |
Write new review
All Categories
- sale
- Arduino
- GPS
- GSM/GPRS
- LCDs
- Single Board Computerv
- Tools
- Development Boards
- Breakout Boards
- Power and Batteries
- Unmanned Aerial System
- Programmers
- Printer
- Tablet
- Intelligent Building
- Electric Vehicle
- Drivers
- Wireless and Communications
- Robotics
- Tracking
- solar Cell
-
Sensors
- IMU/AHRS
- PIR
- Ultrasonics
- Biometrics
- Touch
- liquid level sensor
- Radiations
- Current/Voltage
- Proximity Sensor
- Temperature
- Humidity
- Inclinometer
- Gyro
- Accelerometers
- Flame
- Sound
- Pressure
- Flow Meter
- GAS
- Laser
- Infrared
- Mocrowave
- Magnet & Compass
- Light / image / Color
- Vibration/Force/Torque/Flex
- anemometer
- ID
- Sound
- Components
- Cables
- Interface Converter
- LED and Lighting
Related Articles
There is no article related to this product.