|
Product name: Evaluation Board - ADXL345
Product model: SEN-00178
Unavailable
Description
Evaluation Board - ADXL345
Description: This is an evaluation board for the ADXL345
three-axis accelerometer. The ADXL345 is an awesome little
accelerometer, capable of measuring acceleration of up to ±16g at up to
13-bit resolution. The evaluation board includes everything you'll need
to adjust the ADXL345's settings, and monitor and log its outputs.
The on-board ATmega328 takes care of all the I2C/SPI communication with
the ADXL345, and it will also log the x-, y-, and z-axis acceleration
values onto a uSD card.
The board includes a USB interface, which allows you to read/write any
of the ADXL345's registers using a terminal emulator. The default baud
rate is 57600bps (8-N-1). The UART pins are also broken out allowing a
direct TTL interface with the processor.
Power can be supplied by 2xAA batteries, or with a 3.0-3.3VDC power supply at the VCC/GND pins.
The ADXL345 evaluation board does not include batteries, uSD card or a
USB cable, check the related items section below for these products.
Note: Previous boards have been shipped without the Arduino
Bootloader preinstalled on the ATmega328. This issue has been fixed; in
all orders from now on the microprocessor will have the bootloader
loaded.
Features:
-
ADXL345 triple-axis accelerometer installed
-
microSD card socket for FAT32/16 data logging
-
ATmega328 with Arduino bootloader
-
USB connector for serial communication
-
2xAA battery sockets to power board
-
Pre-installed firmware logs ADXL345 outputs and allows you to read/write registers via USB
Dimensions: 2.75x2.70"
Documents:
|
|