STM32F407VGT7
The STM32F405xx and STM32F407xx family is based on the high-performance ARM®Cortex®-M4 32-bit RISC core operating at a frequency of up to 168 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
The STM32F405xx and STM32F407xx family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 192 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.
All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. a true random number generator (RNG). They also feature standard and advanced communication interfaces.
· Core: ARM® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
· Memories
· Up to 1 Mbyte of Flash memory
· Up to 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM
· Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories
· LCD parallel interface, 8080/6800 modes
· Clock, reset and supply management
· 1.8 V to 3.6 V application supply and I/Os
· POR, PDR, PVD and BOR
· 4-to-26 MHz crystal oscillator
· Internal 16 MHz factory-trimmed RC (1% accuracy)
· 32 kHz oscillator for RTC with calibration
· Internal 32 kHz RC with calibration
· Sleep, Stop and Standby modes
· VBATsupply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM
· 3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode
· 2×12-bit D/A converters
· General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
· Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
· Debug mode
· Serial wire debug (SWD) & JTAG interfaces
· Cortex-M4 Embedded Trace Macrocell™
· Up to 140 I/O ports with interrupt capability
· Up to 136 fast I/Os up to 84 MHz
· Up to 138 5 V-tolerant I/Os
· Up to 15 communication interfaces
· Up to 3 × I2C interfaces (SMBus/PMBus)
· Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)
· Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock
· 2 × CAN interfaces (2.0B Active)
· SDIO interface
· Advanced connectivity
· USB 2.0 full-speed device/host/OTG controller with on-chip PHY
· USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI
· 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
· 8- to 14-bit parallel camera interface up to 54 Mbytes/s
· True random number generator
· CRC calculation unit
· 96-bit unique ID
· RTC: subsecond accuracy, hardware calendar
- sale
- Arduino
- GPS
- GSM/GPRS
- LCDs
- Single Board Computerv
- Tools
- Development Boards
- Breakout Boards
- Power and Batteries
- Unmanned Aerial System
- Programmers
- Printer
- Tablet
- Intelligent Building
- Electric Vehicle
- Drivers
- Wireless and Communications
- Robotics
- Tracking
- solar Cell
-
Sensors
- IMU/AHRS
- PIR
- Ultrasonics
- Biometrics
- Touch
- liquid level sensor
- Radiations
- Current/Voltage
- Proximity Sensor
- Temperature
- Humidity
- Inclinometer
- Gyro
- Accelerometers
- Flame
- Sound
- Pressure
- Flow Meter
- GAS
- Laser
- Infrared
- Mocrowave
- Magnet & Compass
- Light / image / Color
- Vibration/Force/Torque/Flex
- anemometer
- ID
- Sound
- Components
- Cables
- Interface Converter
- LED and Lighting