8CH Logic Analyzer

A very useful debugging tool for digital signal analyzing, help you fully analyzing the UART, IIC, SPI, CAN all of these interface. If you don’t want start with expensive oscilloscope, this will be another good choice.

Features:

• A total of eight digital channels, =voltage range is 0V ~ 5.5V, the voltage threshold is considered to be low below 1.5V, 1.5V above is considered high.
• Package includes the main device, 10pins of dupont cable and one USB cable.
• See basic how it works and how to use the introduction video below.
• Samples : How much samples to collect, Mhz: frequency of sampling, so 50M * 1Mhz will be 50 total sampling time.
• This one is a starter version, different to Saleae16, which has 100Mhz, 16-channel version

Saleae8 performance indicators and saleae16, channel number eight, less speed is 24 m, the highest video software usage can reference but not all the same.

If you do single chip development, strongly recommend you to buy this product!!!!!!!!!!!
If you do the ARM system development, strongly recommend you to buy this product!!!!!!!!!!!
If you do the FPGA development, strongly recommend you to buy this product!!!!!!!!!!!
To do a good job, must first sharpen his device MCU related products, as long as you do this tool will be your crescent moon nod. Especially do UART, SPI, IIC communication debugging, absolutely let you get twice the result with half the effort.
24 m sampling rate, can automatically analyze UART, IIC, SPI, and many other standard protocol.

A total of eight digital channel, 5.5 V voltage range is 0 V, 1.5 V for voltage threshold, below 1.5 V is considered to be low level and higher than 1.5 V is regarded as a high level.
This is the paperback edition of the series of products, as well as hardcover version:

• Introduction video.
• S#--el-editor---0.06001775688491762oftware Download.(Supported by official software)
•